top of page

WELL CELL SERIES

ATL Well Cells are crash-worthy FIA FT3 approved “hard rubber” moulded fuel cells designed to fit in the spare tire well of most vehicles. The rugged crashworthy FIA FT3 approved hard rubber moulded fuel bladder is all fuel compatible and comes assembled with composite nut-ring, foam baffling, duck foot pick-up and a powder coated steel fill plate with aluminium billet twist cap. ATL Well Cells come with a 5 year limited warranty. See table below for size varients.

Fuel Compatibility: All fuels including Race Gas, Diesel, E15, E85 & E98. ATL Well Cells come with a 5 year warranty.

unnamed.jpg
Untitled design (12).jpg
840-ATL-WELL-CELL-FUEL-CELL.jpg
WC112.jpg
WC116.jpg

WC108, 8Gal (30L) Well Cell

WC112, 12Gal (45L) Well Cell

WC116, 12Gal (45L) Well Cell

840-ATL-WELL-CELL-FUEL-CELL.jpg
THE BLADDER

The Bladder is a “hard-rubber” roto-moulded fuel cell certified to FIA FT3 specifications and is compatible with all fuels. It is crash resistant and deformable and comes with a composite nut ring installed.

blob.jpg
plate.jpg
ATL Fuel Pick up Hose.JPG
THE FOAM BAFFLING

The SF103 Foam Baffling is designed for anti-slosh and explosion suppression. If you are using 100% Methanol, you will need to upgrade to the SF110 Safety Foam.

THE FILL PLATE

The Fill Plate is a powder coated steel plate that features a stamped steel twist cap and flap type roll over valve. AN6 or AN8 outlet, AN6 return and AN6 vent-check roll-over valve.

THE FUEL PICKUP

The fuel pick up is a single hose with a 90 degree sock filter.

FUEL LEVEL SENSING
b.jpg
ATL+float+style+probe.jpg
ATL+DIP+STICK.jpg
CAPACITANCE STYLE PROBE KIT
FLOAT STYLE PROBE KIT
DIP STICK
FOAM BAFFLING
SAFETY+FOAM.jpg

Capacitance style fuel level sender kit (12V) is compatible with Race gas, Diesel and E10. The kits includes the level sensing probe and lighted gauge. 

Float style fuel level sender kit (12V) is compatible with all fuels including E85+. The kit includes the level sending probe and lighted gauge.

Dip Stick Kit includes the Dip Stick and a AN Bulk head assembly. Available in 3 sizes including AN6, AN8 and AN10.

Foam Baffling is designed for anti-slosh and explosion suppression. If you are using 100% Methanol, you will need to upgrade to the black SF110 Safety Foam.

ALUMINIUM FILL PLATES
TF600.jpg
TF600
ALUMINIUM FILL PLATE WITH BILLET TWIST CAP
TANK FILL

6x10” aluminium fill plate with billet twist cap. Fill neck is 1.25” tall with flap valve. Comes with 2 x AN6, 8 or 10 Outlets, AN6 Vent and AN6 Return (return fitting is missing from image).

Off+set+remote+fill+paddle+valve.jpg
TF703

OFF-SET 2.25” OD FILL NECK
 
 REMOTE FILL W/ PADDLE VALVE
Quick+fill+paddle+valve.jpg
TF525

2.25” OD FILL NECK, 1.5” VENT

REMOTE QUICK-FILL W/PADDLE VALVE
Quick+fill+flpper+valve.jpg
TF193A-184A

2.25” OD FILL NECK, 1.5” VENT

REMOTE QUICK-FILL W/FLAPPER VALVE
Quick+fill+paddle+valve+2+1_2'.jpg
TF770

2.5” OD FILL NECK, 1.5” VENT

REMOTE QUICK-FILL W/PADDLE VALVE
Remote+quick+fill+3'.jpg
TF702

3” OD FILL NECK, 1.5” VENT

REMOTE QUICK-FILL W/PADDLE VALVE

6x10” aluminium fill plate with off-set remote-fill filler neck with paddle valve. Comes with AN8 Outlet, AN6 Vent and AN6 Return. Can be drilled for fuel level sender unit.

6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.

6x10” aluminium fill plate with remote-fill filler neck with flapper valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.

6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.

6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with AN8 Outlet.

SURGE TANKS & INTERNAL PUMPS
No+pump.jpg
EFI+100+PSI+W_+HP+Pump.jpg
CARB+15+PSI+W+LP+Pump.jpg
Dual+EFI+100+PSI+Pump.jpg
EFI+100+PSI+Pump+E85+Compatible.jpg
EFI+100+PSI+W+HP+Bosch+pump.jpg
ST528
NO PUMP
CFD-600-HP 
100 PSI PUMP
CFD-625-LP
15 PSI PUMP
CFD-650-HP
DUAL 100 PSI PUMPS
CFD-675-HP
100 PSI PUMP
CFD-700-HP
100 PSI PUMP

3-Door moulded surge tank with ScavenJet pick-up fitting.For use with an external fuel pump.

3-Door moulded surge tank with ATL’s 12v CFD-104 high pressure pump. Suitable for pump gas up to E15 max.

3-Door moulded surge tank with ATL’s 12v CFD-107 low pressure pump. Suitable for pump gas up to E15 max.

3-Door moulded surge tank with 2 of ATL’s 12v CFD-104 high pressure pumps. Suitable for pump gas up to E15 max.

3-Door moulded surge tank with ATL’s 12v CFD-115 high pressure pump. Suitable for pump gas, race gas and E85.

3-Door moulded surge tank with 12v Bosch 044 high pressure fuel pump (ATL PN: KS163). Suitable for pump gas up to E15 max.

CAPACITIES & DIMENSIONS

WELL CELL IMAGE.JPG
WC116+drawing.jpg
WC116+Rear+view.jpg
WC116.jpg
Well Cell Catalogue Image.JPG
Upgrades Catalogue Image.JPG

WELL CELL STANDARD FEATURES

OPTIONAL UPGRADES

OPTIONAL UPGRADES

bottom of page