top of page

BANTAM SERIES

ATL's Bantam Series includes their thinnest bladder available which is ideal for long distance races and comes in a wide variety of shapes and sizes. They are FIA FT3 approved and include a crash resistant, lightweight Kevlar bladder only 0.7mm thick, lightweight aluminium container, foam baffling, fill plate and fuel pickup. They are compatible with all race fuels with a maximum 20% Ethanol content.  The Bantam has the maximum fuel capacity and weight savings.

 

ATL’s Super Cell Series come with a 5 year limited warranty. See table below for size variants.

 

Fuel Compatibility: Race fuels with maximum 20% Ethanol content.

unnamed.jpg
Bantam Cell.JPG
a.jpg
FB605.jpg
ALLI CONTAINER

“Top load” style light weight aluminium container.

THE BLADDER

The Bladder is an approved crash resistant, lightweight Kevlar reinforced 0.7mm thickness bladder with cross-drilled composite nut-ring installed.

blob.jpg
THE FOAM BAFFLING

The SF103 Foam Baffling is designed for anti-slosh and explosion suppression. If you are using 100% Methanol, you will need to upgrade to the SF110 Safety Foam.

TF600.jpg
THE FILL PLATE

The Fill Plate is an aluminium plate that features a billet aluminium cap with flap type roll over valve. AN6, AN8 or AN10 outlet. AN6 return, AN6 vent-valve roll-over valve and AN6 Dipstick.

ATL ScavenJet Fuel Pickup.jpg
THE FUEL PICKUP

A single scavenjet fuel pickup with a stud mounted adhered to the right-rear corner. Hose is included. You can request alternate pick-up locations.

FUEL LEVEL SENSING
b.jpg
CAPACITANCE STYLE PROBE KIT
ATL+float+style+probe.jpg
FLOAT STYLE PROBE KIT
FOAM BAFFLING
SAFETY+FOAM.jpg

Capacitance style fuel level sender kit (12V) is compatible with Race gas, Diesel and E10. The kits includes the level sensing probe and lighted gauge. 

Float style fuel level sender kit (12V) is compatible with all fuels including E85+. The kit includes the level sending probe and lighted gauge.

Foam Baffling is designed for anti-slosh and explosion suppression. If you are using 100% Methanol, you will need to upgrade to the black SF110 Safety Foam.

ALUMINIUM FILL PLATES
Off+set+remote+fill+paddle+valve.jpg
TF703

OFF-SET 2.25” OD FILL NECK
 
 REMOTE FILL W/ PADDLE VALVE

6x10” aluminium fill plate with off-set remote-fill filler neck with paddle valve. Comes with AN8 Outlet, AN6 Vent and AN6 Return. Can be drilled for fuel level sender unit.

Quick+fill+paddle+valve.jpg
TF525

2.25” OD FILL NECK, 1.5” VENT

REMOTE QUICK-FILL W/PADDLE VALVE

6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.

Quick+fill+flpper+valve.jpg
TF193A-184A

2.25” OD FILL NECK, 1.5” VENT

REMOTE QUICK-FILL W/FLAPPER VALVE

6x10” aluminium fill plate with remote-fill filler neck with flapper valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.

Quick+fill+paddle+valve+2+1_2'.jpg
TF770

2.5” OD FILL NECK, 1.5” VENT

REMOTE QUICK-FILL W/PADDLE VALVE

6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.

Remote+quick+fill+3'.jpg
TF702

3” OD FILL NECK, 1.5” VENT

REMOTE QUICK-FILL W/PADDLE VALVE

6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with AN8 Outlet.

SURGE TANKS
ATL 3-door Surge Tank.jpg
ST520
3-DOOR SURGE TANK
ATL 2-door surge tank.jpg
ST524
2-DOOR SURGE TANK

For Road course, rally and off-road. This has a capacity of 0.8 gallons and comes with a ScavenJet AN8 Fuel pickup.

For circle track use. This has a capacity of 0.8 gallons and comes with a ScavenJet AN8 Fuel pickup.

CAPACITIES & DIMENSIONS

BANTAM IMAGE.JPG
Bantam Catalogue Image.JPG

BANTAM STANDARD FEATURES

OPTIONAL UPGRADES

FOR MORE INFORMATION - SEE ATL'S CATALOGUE BELOW

bottom of page