SPORTS CELL SERIES
ATL’s Sports Cells are “Hard Rubber” roto-moulded fuel cells certified to FIA FT3 specifications. They are extremely durable and hard wearing though not very flexible (at all). ATL’s Sports Cells are the most versatile and popular within the ATL fuel cell range. Sports Cells come with a 5 year limited warranty. See table below for size variants.
​
​Both the Saver Cells and Sports Cells are the most economical fuel cell options in ATL’s range, though the addition of the extra fuel pick-up and the outer container make the Sports Cells slightly more expensive than the Saver Cells. As the Saver Cells don’t come with the fuel cell outer container, you can choose to either fabricate this yourself (see container fabrication guidance material) or add one to your order as an optional upgrade.
Fuel Compatibility: All Fuels including Race Gas, Diesel, E15, E85, E98 and Methanol. (Foam upgrade required when using 100% methanol).
​
STEEL CONTAINER
The Bladder is a “hard-rubber” roto-moulded fuel cell certified to FIA FT3 specifications and is compatible with all fuels. It is crash resistant and deformable and comes with a composite nut ring installed.
THE BLADDER
The Bladder is a “hard-rubber” roto-moulded fuel cell certified to FIA FT3 specifications and is compatible with all fuels. It is crash resistant and deformable and comes with a composite nut ring installed.
THE FOAM BAFFLING
The SF103 Foam Baffling is designed for anti-slosh and explosion suppression. If you are using 100% Methanol, you will need to upgrade to the SF110 Safety Foam.
THE FILL PLATE
THE FUEL PICKUP
The Fill Plate is a powder coated steel plate that features a stamped steel twist cap and flap type roll over valve. AN6 or AN8 outlet, AN6 return and AN6 vent-check roll-over valve.
A single “duck foot” style pick-up with fuel trap and filter.
CONTAINERS
FUEL LEVEL SENSING
FOAM BAFFLING
ALUMINIUM CONTAINER
CAPACITANCE STYLE PROBE KIT
FLOAT STYLE PROBE KIT
DIP STICK
SF110 METHANOL FOAM BAFFLING
“Top load” style light weight aluminium container.
Capacitance style fuel level sender kit (12V) is compatible with Race gas, Diesel and E10. The kits includes the level sensing probe and lighted gauge.
​
Float style fuel level sender kit (12V) is compatible with all fuels including E85+. The kit includes the level sending probe and lighted gauge.
​
Float style fuel level sender kit (12V) is compatible with all fuels including E85+. The kit includes the level sending probe and lighted gauge.
​
Foam Baffling is designed for anti-slosh and explosion suppression. If you are using 100% Methanol, you will need to upgrade to the black SF110 Safety Foam.
​
ALUMINIUM FILL PLATES
TF703
OFF-SET 2.25” OD FILL NECK
REMOTE FILL W/ PADDLE VALVE
6x10” aluminium fill plate with off-set remote-fill filler neck with paddle valve. Comes with AN8 Outlet, AN6 Vent and AN6 Return. Can be drilled for fuel level sender unit.
​
TF525
2.25” OD FILL NECK, 1.5” VENT
REMOTE QUICK-FILL W/PADDLE VALVE
6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.
​
TF193A-184A
2.25” OD FILL NECK, 1.5” VENT
REMOTE QUICK-FILL W/FLAPPER VALVE
6x10” aluminium fill plate with remote-fill filler neck with flapper valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.
​
TF770
2.5” OD FILL NECK, 1.5” VENT
REMOTE QUICK-FILL W/PADDLE VALVE
6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with 2 x AN8 Outlets, AN6 Return and AN6 dip-stick.
​
TF702
3” OD FILL NECK, 1.5” VENT
REMOTE QUICK-FILL W/PADDLE VALVE
6x10” aluminium fill plate with remote-fill filler neck with paddle valve and spring-loaded “bullet” style vent valve. Comes with AN8 Outlet.
​
SURGE TANKS & INTERNAL PUMPS
ST528
NO PUMP
CFD-600-HP
100 PSI PUMP
CFD-625-LP
​
15 PSI PUMP
CFD-600-HP
DUEL 100 PSI PUMPS
CFD-675-HP
100 PSI PUMP
CFD-700-HP
​
100 PSI PUMP
3-Door moulded surge tank with ScavenJet pick-up fitting.For use with an external fuel pump
CAPACITIES & DIMENSIONS
​3-Door moulded surge tank with ATL’s 12v CFD-104 high pressure pump. Suitable for pump gas up to E15 max.
​3-Door moulded surge tank with ATL’s 12v CFD-107 low pressure pump. Suitable for pump gas up to E15 max.
​3-Door moulded surge tank with 2 of ATL’s 12v CFD-104 high pressure pumps. Suitable for pump gas up to E15 max.
3-Door moulded surge tank with ATL’s 12v CFD-115 high pressure pump. Suitable for pump gas, race gas and E85.
3-Door moulded surge tank with 12v Bosch 044 high pressure fuel pump (ATL PN: KS163). Suitable for pump gas up to E15 max.
