The Rally Raid Series is FIA FT3 approved and is suited to rough terrain and elevation changes. It is a light weight fuel cell that includes a nylon-reinforced fuel bladder with built in collector tank, Foam baffling, Fill plate and fuel pick-up. There is a centrally mounted internal 4 door collector with guide vanes and the pick-up which is designed for ultimate fuel scavenging.
Fuel Compatibility: Race fuels with maximum 15% ethanol content.
NOTE: All pricing below is in USD and excludes shipping costs from the USA. We have listed it as a guide only. Formal pricing will be provided upon request.
The Bladder is a FIA FT3 approved 3 layer ballistic nylon reinforced flexible fuel bladder. It is crash resistant and deformable and comes with a composite nut ring installed.
The SF103 Foam Baffling is designed for anti-slosh and explosion suppression.
The Fill Plate is an anodized aluminium fill plate that features a 45° Filler neck with a FIA non-return fill valve, level sender & gauge. - 6AN outlet, -6AN return and -6AN rollover vent valve.
The single scavenJet pick up is adhered to the right rear corner of the bladder. The length of the hose is 22”.
The container is constructed of a .063” light weight aluminium. It is a top load which comes standard on most cells. The top lid unbolts for access.
The CFD-104 High Pressure internal fuel pump is mounted within the collector cox. It is 100PSI and compatible with Gas only.
The drain can be added on to the bottom of the bladder as an upgrade.